Ega Master 79631 Mode D'emploi page 31

First connect the machine and then connect the compressed air supply.
Prior to starting the machine put the reverse slide for rotation direction left and right into the
correct position.
For example, if you want to loosen a screw and the rotation direction is adjusted to a position
for screwing in, this can lead to violent uncontrolled movement of the pneumatic impact wrench.
Setting the rotation direction
The rotation direction is set with the reverse slide 2 (see fig. 4).
Actuate the reverse slide only when the pneumatic impact wrench is switched off.
Rotation direction right: For screwing-in of screws and nuts turn the reverse slide
clockwise.
Rotation direction left: For unscrewing of screws and nuts turn the reverse slide
anticlockwise.
Rotation direction left
Put the power socket wrench solidly and correctly on the screw head or the nut and start the
pneumatic impact wrench (see fig. 5).
Fig.4
Start and stop
Fig.5 Press or release
31