Kärcher NT 48/1 Mode D'emploi page 7

Masquer les pouces Voir aussi pour NT 48/1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation
Turning on the Appliance
Plug in the main plug.
Turn the appliance on and put it into op-
eration.
Emptying the dirt container
The suction canal (6) is equipped with a
float.
– When the dirt water reaches the highest
permissible level in the container, the
suction power is interrupted.
Turn off the appliance.
Empty the dirt container.
Drain off dirty water through the drain-
age hose.
Shutting down
Empty the dirt container.
Vacuum and wipe the appliance inside
and outside.
Place the appliance in a dry room and
secure it from unauthorized use.
Maintenance and care
Warning
First remove the mains plug before doing
any job on the vacuum cleaner.
Change cartridge filter
Release and remove the suction head.
Turn the suction basket by 180° and
keep it aside.
Loosen nut (3).
Remove the cartridge filter (1).
Insert the new cartridge filter (1).
Insert the nut (3) and tighten it.
Insert and lock the suction head.
7
English

Publicité

Chapitres

Table des Matières
loading

Table des Matières