Kärcher NT 48/1 Mode D'emploi page 8

Masquer les pouces Voir aussi pour NT 48/1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Suction turbine does not run
Check cables, plugs, fuse, and socket.
Turn on the appliance.
Vaccum turbine is running but the
machine is not sucking in dust/dirt
– Float is blocking the suction canal.
Empty the dirt container.
Suction capacity decreases
Remove choking of suction nozzle, suc-
tion tube, suction hose, or cartridge fil-
ter.
Exchange the paper filter bag.
Change cartridge filter.
Dust comes out while vacuuming
Check the proper installation of the car-
tridge filter.
Change cartridge filter.
Warranty
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Accessories and Spare Parts
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
8
English
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.

Publicité

Chapitres

Table des Matières
loading

Table des Matières