Kärcher NT 48/1 Mode D'emploi page 6

Release and remove the suction head.
Insert the paper filter bag (2).
Insert and lock the suction head.
Wet vacuum cleaning
Inserting the rubber lips
Remove the brush strips (4).
Insert the rubber lips (5).
Note
The structured side of the rubber lips must
point outwards.
Remove the paper filter bag
– To suck wet dirt, first remove the paper
filter bag (2).
6
English
Installing an additional filter
Release and remove the suction head.
Turn the suction basket by 180° and
keep it aside.
Loosen nut (3).
Remove the cartridge filter (1).
Insert the nut (3) and tighten it.
Install the additional filter.
Insert and lock the suction head.
Clip connection
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.