Philips SmartSleep Snoring Relief Band Mode D'emploi page 20

20
English
Vibration level
Vibration patterns
Cleaning
Cleaning the sensor
Cleaning the strap
The sensor shows a small dot on the left side of
the display to indicate that the adaptation phase is
active.
The sensor has a self-learning algorithm. The
sensor optimizes the vibration level based on your
reaction time.
Every five days, the vibration pattern changes to
make sure that you do not get used to the
vibrations and that you will keep responding to
them.
Warning: Do not immerse the sensor in
water and do not rinse it under the tap.
Warning: Never clean the sensor with
abrasive cleansing products or (aggressive)
liquids.
Clean the sensor with a dry cloth after use, if
needed.
Warning: Always remove the sensor from
the strap before you put the strap in the
washing machine.
1 You can wash the strap in the washing machine
according to the washing instructions.