Selecting The Stitch Pattern; Pattern Selector Dial; Stitch Length Dial - Janome 509 Livret D'instructions

w
r
t

Selecting the Stitch Pattern

Raise the needle to its highest position.

Pattern selector dial

Turn the pattern selector dial to set the symbol of the
desired stitch pattern at the setting mark.
q Pattern selector dial
w Setting mark
CAUTION:
Do not turn the pattern selector dial while the needle is in
the fabric, otherwise the needle may bend or break.
q

Stitch Length Dial

Turn the stitch length dial to set the desired stitch length
number at the setting mark.
The higher the number, the longer the stitch
The "
sewing the buttonhole.
r Setting mark
t Stitch length dial
30
" mark shows the adjustment range when