Installing Your Wine Cellar; Unpacking Your Wine Cellar; Leveling Your Wine Cellar; Proper Air Circulation - Haier HVTB18DABB Guide De L'utilisateur

INSTALLING YOUR WINE CELLAR

Unpacking Your Wine Cellar

1. R emove all packaging material. This includes the base and all adhesive tape
holding the wine cellar accessories inside and outside.
2. I nspect and remove any remains of packing, tape or printed materials before
powering on the wine cellar.

Leveling your Wine Cellar

• Y our wine cellar has 4 leveling legs. After properly placing your wine cellar in
its final position, you can level your wine cellar.
• L eveling legs can be adjusted by turning them counterclockwise to raise your
wine cellar or by turning them clockwise to lower your wine cellar.

Proper Air Circulation

• T o assure your wine cellar works at the maximum efficiency it was designed
for, you should install it in a location where there is proper air circulation and
electrical connections.
• T he following are recommended clearances around the wine cellar
Sides ..................... 2" (50mm)
Top ....................... 4" (100mm)
Back . ..................... 2" (50mm)
• D o not over fill your wine cellar for proper internal air circulation.
NOTE: Allow enough space in the front of the unit to
open the door to 120˚.
English
4