Black Diamond Camalot C3 Notice D'utilisation page 7

CARE AND MAINTAINANCE
Camalot C3s demand a certain amount of care. Proper storage and routine
checkups will prolong the life of your Camalot C3s.
Store Camalot C3s in a clean, dry environment, out of direct sunlight.
◆
Keep Camalot C3s away from heat sources.
◆
Do not allow Camalot C3s into contact with corrosives such as battery
◆
acid, solvent, etc.
Protect your Camalot C3 from damage during transport.
◆
If your Camalot C3 has sticky action or is clogged with dirt: wash in very
◆
warm, clean water and dry completely. Lube after washing and drying and
wipe off the excess.
Wash and lube after contact with saltwater or salt air.
◆
To maintain optimal cam action, ensure that all trigger wires run
◆
smoothly from the cam with minimal contact to any other parts.
Keep axles lubricated to prevent rust.
◆
Never modify your Camalot C3.
◆
If the webbing or stitching is fuzzy, frayed, melted, cut or torn, or has been
overly exposed to ultraviolet light, the Camalot C3 should not be used until
you have the sling replaced. For recommendations on sling replacement,
contact the Black Diamond Warranty Center in the United States by calling
(801) 278-5552 or contact your local retailer for further information.
If a retractor wire is bent or broken, Retractor Wire Replacement Kits are
available for the Camalot C3.
LIFE ExPECTANCY
With normal use and proper care, the life expectancy of your Camalot C3 is
approximately three years, and can be longer or shorter depending on how
frequently you use it and on the conditions of its use.
Factors that reduse its lifespan:
Falls
◆
Abrasion, cuts, wear
◆
Sunlight (sling material)
◆
Corrosives
◆