Getting Started - Luvion PLATINUM 2 Guide D'utilisation

8

GETTING STARTED

Parent unit (monitor)
Determine whether you will be using the docking station, or connecting the cables directly to the
parent unit before installation.
1.
Carefully unpack the parent unit.
2.
Place the parent unit in a place that has clear reception with the baby unit.
3.
Plug the DC 5V power adapter into the DC 5V input at the side of the parent unit. Plug the
power adapter in the wall socket.
The parent unit will start to charge; the charging indication LED will now turn red.
4.
Leave the parent unit to charge prior to the first time use until the built-in rechargeable
battery is fully charged. The charging indication LED will turn green when the battery is fully
charged.
Note: Do not remove the power adapter during the initial charging process. After the initial
charge, charge the parent unit as required.
Baby unit (camera)
Before installing the baby unit, carefully plan where and how it will be positioned, and where you
will route the cable of the power adapter.
Before starting permanent installation, verify the reception of the baby unit video on the parent
unit. Verify this when both the baby unit and the parent unit are placed in their preferred
positions.
1.
Carefully unpack the baby unit.
Note: If you are installing baby units that do not come with the initial system (separately sold
baby units), please look at the pairing baby units section of this manual for details on installation.
2.
Mount the baby unit on the wall or put it on a cabinet, table or shelf. To mount the baby unit
on the wall, mark the position of the 2 screw holes on the wall. Drill the holes and insert the
included wall plugs and screws. Firmly attach the baby unit on the wall by placing the base
over the screws and pushing it downwards.
3.
Point the camera of the baby unit towards the area you want to monitor.
Note: Select a location for the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of sight to a strong light source or direct sunlight.
The baby unit can be powered by the included power adapter or by 4AA batteries (not
included).
All manuals and user guides at all-guides.com