19. WARNING – ALWAYS plug heater directly into
a wall outlet/receptacle. DO NOT use with an
extension cord or relocatable power tap
(outlet/power strip).
20. WARNING – NEVER tamper with this product
or attempt to fix it. Any tampering with, or
modification of this product can result in serious
injury, death, or fire. DO NOT open. Risk of electric
shock. There are no user serviceable parts inside.
21. WARNING – DO NOT remove product labels
that contain warnings or safety instruction.
22. CAUTION – The output of this heater may vary
and its temperature may become intense enough
to burn exposed skin. Use of this heater is not
recommended for persons with reduced sensitivity
to heat or an inability to react to avoid burns.
SET UP
Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9 m) away from
any wall or combustible material. DO NOT use on an unstable surface such as bedding or deep carpeting.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE A TRIPPING HAZARD.
MOVING THE HEATER
Turn off the heater.
Allow it to cool for ten minutes. NOTE: On the HCE220 series, the fan will continue to run after the unit is turned
off in order to cool the motor. This is normal and the fan will turn off when the unit is cool.
Unplug heater and move it to the desired location. This heater is equipped with a Cool Touch Handle for
your convenience.
23. CAUTION – Before cleaning, or storage, or when
not in use, turn the product's controls to the OFF
position and unplug the heater from the electrical
outlet and allow to cool.
24. CAUTION – Place the heater on a firm, level, open
surface free from obstructions and at least 3 feet
(0.9m) away from any combustible materials.
DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater is
not in a position where it may be a tripping hazard.
25. CAUTION – If your home has aluminum wiring
have a licensed electrician check your receptacle's
connections. When using a 1500 watt heater,
aluminum wire connections can cause a safety issue.
SAVE THESE INSTRUCTIONS.
3