Commissioning; Function Check; Maintenance; Accessories - Endress+Hauser RIA141 Manuel De Mise En Service

8

Commissioning

8.1

Function check

Make sure all connected wires are secure.
To ensure correct functioning, the screws of the terminals must be tightened. The device is now
operational.
During device initialization, all the segments are shown on the display for approx. 1 second.
"
Caution!
Prior to commissioning, the screw cap must be tightened and secured with the cover clamp. Any
openings not used must be sealed.
9

Maintenance

No special maintenance work is required on the device.
10

Accessories

Order code
51007995
51004949
51006845
51006890
51006888
51004490
51006889
TXU10-xx
Accessory
Mounting bracket
1 x cable entry M20x1.5
1 x cable gland NPT ½"
1 x blank (blind) M20x1.5
1 x blank (blind) NPT ½" (stainless steel 316L)
1 x blank (blind) NPT ½" (aluminum)
1 x blank (blind) JIS G½"
• Configuration kit for PC programming
(Interface cable for PC with USB port + ReadWin
®
• ReadWin 2000 can be downloaded free of charge from the Internet at the following
address:
www.endress.com/readwin
Commissioning
®
2000 PC software)
57