Installation Of The Chair On Your Stroller Jané - JANE IMATRIX Mode D'emploi

iMATRIX safety seat should be adjusted so they go just above the
baby's shoulders. Check the height of the straps when the baby is
correctly positioned in the seat. 5
Your iMATRIX safety seat is fitted with a shoulder strap quick height
adjustment system by using the headrest position adjustment
button. Pull the handle on the headrest and slide is along the bac-
krest to the required position. Check that it is locked into place by
pulling the adjustment mechanism.
Tighten the harness system by pulling the central belt so that it fits the
child's body snugly. 4 .j
.c
4
.i
K. INSTALLATION OF THE CHAIR ON YOUR
STROLLER JANÉ
Your iMATRIX can be fastened onto any JANÉ chassis fitted witht Pro-
fix connectors (always check the pushchair instructions before fitting
the iMATRIX).
To fasten the safety seat onto a chassis, insert the Pro-fix connectors
into the slots in the chassis and press.
correctly when you hear it lock into place and a green strip is displa-
yed on the Pro-fix lever (found on the handle joint).
To release the iMATRIX from the chassis, simultaneously pull the re-
lease levers upwards found on both sides of the chassis joints and lift
the baby carrier up. 6 .c
WARNING: The iMATRIX should always be attached to the push-
!
chair so the baby is facing the parent.
6 .a Your iMATRIX is fastened
6
.b
51
EN