Ventilation Channels; Using Your Transporter On Your Jané Pushchair - JANE TRANSPORTER figures Mode D'emploi

1
positions.
.b
For your baby's comfort, it can be raised up to an angle of 20º.
For your baby's correct development, we recommend leaving him to
rest in the flattest position.
ATTENTION: The backrest should be set to the lowest position
!
before carrying or lifting the carrycot.

VENTILATION CHANNELS

Your TRANSPORTER safety carrycot is fitted with ventilation channels
for better breathability:
Lower ventilation channel. Press the button found on the underneath
part of the head area to open the two channels in hot weather.
E. USING YOUR TRANSPORTER ON YOUR JANÉ
PUSHCHAIR
The chassis of your pushchair is fitted with the PRO-FIX system, ready
to attach your TRANSPORTER.
The PRO-FIX system makes it easy to attach and remove your TRANS-
PORTER from the chassis, quickly, simply and safely, securely anchor-
ing it to the chassis.
WARNING: Before using the product, always make sure that
!
your TRANSPORTER is firmly anchored to the chassis by pulling
it upwards.
To attach your TRANSPORTER to the chassis, insert the connectors
into the slots in the chassis and press until you hear them CLICK.
To release your TRANSPORTER from the chassis, press the buttons on
the handle and pull it upwards.
2
.b
2
.a
21
EN