Getting To Know The Imatrix Safety Seat - JANE IMATRIX Mode D'emploi

D. GETTING TO KNOW THE iMATRIX SAFETY SEAT
Your iMATRIX safety seat has been designed taking into account the
latest advances in terms of safety and it has been tested under the
toughest conditions. It has the following features:
Installing in the vehicle:
Ready for quick installation on a base with the ISOFIX system (See the
section titled INSTALLING THE SAFETY SEAT IN YOUR VEHICLE of these
instructions).
Comfort and safety for the baby:
3-point integrated harness.
Ventilation in the shell for greater breathability. Impact-absorbing
material over the entire surface in contact with the baby.
Adjustable headrest with 2 different positions, both of which can be
used on the pushchair and in the car
C1 Closed position, so the baby travels in the carrycot position.
C2 Open position so the baby travels in a sitting position.
Reclining backrest with 4 positions:
R1 Position for the baby to travel lying down, highly recommendable
4
.b:
position for the first few months. (Not suitable for in the car)
R2-R3 Intermediate positions (Not suitable for in the car)
R4 Position for the baby to travel sitting up, and the only position suita-
ble for use of the child Restraint System in the car.
Convenience for parents:
Pro-Fix anchors compatible with JANÉ chassis (always consult the ins-
tructions for each chassis to confirm compatibility before fitting the
iMATRIX).
Carry handle, with 3 positions:
Position 1: Resting. In this position the handle lies flat against the frame.
This position is free, it does not lock.
Position 2: Carrying. This is the position used for fitting and removing
the seat from a JANÉ chassis or the iPLATFORM base and for carrying.
Position 3: CAR. Anti-rollover position for use in the car.
To change the position, press both buttons 2d and turn the handle
to the required position. To move it from the resting position it is not
necessary to press the buttons, simple move the handle.
Belt height adjustment simply by pressing a button. Avoids the incon-
venience of having to remove and then fit the straps again when you
need to change the height of the belts.
Removable and washable upholstery.
43
EN