14.6. Eco mode
You can switch the Eco mode function on or off under
ECO MODE.
This function enables low-radiation operation during
a call. The reduction in radiation will depend on the
distance of the handset from the base.
How to switch the function on or off:
Confirm the setting ECO MODE with MENU.
Use the keys to select ON or OFF.
Confirm by pressing the MENU key.
14.7. Setting the transmission
power
The transmission power of the base station can be
adjusted under ECO RANGE.
HALF RANGE:
FULL RANGE:
The transmission power setting "HALF RANGE" reduces
the transmission range between the base station and
the registered handsets. Check the reception display on
the handset to see whether the transmission power is
sufficient and adjust it where necessary.
How to switch the function on or off:
Confirm the setting ECO RANGE with MENU.
Use the keys to select HALF RANGE or FULL
RANGE.
Confirm by pressing the MENU key.
14.8. Eco Plus
The ECO PLUS function completely disables the
264 / 290
low transmission power
high transmission power