Gilson pipetman Guide Rapide page 2

Parts Checklist
● PIPETMAN® M Connected pipette
●
Power supply, 5V with AC adapter and cable
●
Battery tags (qty 4)
● Ejector tags (qty 4)
●
Tip ejector extension (P10M model only)
●
PIPETMAN® M Connected Quick Guide
● safety bag
●
Certificate of Conformity with barcode sticker
●
lubricant (except for the P10M and
multichannel models)
Installation
NOTICE
Use only one of the approved charging devices:
● Power supply, included in box
●
stand adapter, for use with Gilson
CArrOUsEl™ stands, sold separately
(part number F807023)
● POWEr CArrOUsEl™ charging pipette
stand, sold separately (part number FB1001)
NOTE
Other References
This Quick Guide provides you with basic
information to get started with PIPETMAN M
Connected.
Make sure you have read PIPETMAN M Connected
User's Guide, available on
additional information.
2
PArTs ChECKlIsT | PIPETMAN® M CONNECTED
Fully charge the pipette (for
approximately three hours)
before use.
For daily use, please wait the
pipette battery reach at least
50%.
PiPetMaN M Connected uses a
lithium-ion battery. Operation on
the battery is done at user's risk
only.
the battery can take a few minutes
to wake up.
www.gilson.com
Get Started
All menu options (refer to
page 10) for PIPETMAN M Connected can be
reached with two buttons.
Push Button
Turn the push button left or right to set the
volume. Push to pipette.
Menu Button
Access pipette modes and adjust functions.
Menu
Button
Push
Button
Figure 1
Buttons on the PIPETMAN® M
Connected
NOTE
for
Menu Options
after three minutes of inactivity,
the pipette display will turn off and
enter sleep mode. Press the push
button to reactivate the pipette. the
last setting and pipetting mode will
appear on the screen.
PIPETMAN® M CONNECTED | QUICK GUIDE
on
3