Table des Matières
Publicité
1618748_extractor.qxp_Layout 1 7/17/19 9:30 AM Page 8
How to maintain
ENGLISH
To receive reliable service from this
equipment, regular daily maintenance
is required
1. Keep the equipment clean, both inside and out.
2. Lubricate brass quick disconnects with a quality
lubricant (Fig. 1).
3. Flush solution systems after use with clear, clean
water. (A white vinegar solution of 1 part vinegar to 8
parts water may also be used). This will counter-act
hard water and alkaline deposits and aid in keeping
orifices clean.
4. Do not allow fluid, either in solution or waste tank, to sit
overnight. The unit should be emptied and cleaned
daily.
5. Clean the strainer in the solution tank, the float cage
and all lint filters in the inlet or vacuum tank daily
(Fig. 2).
6. When the unit is not in use, leave the vacuum tank lid
open (Fig. 3).
7. At the end of each day, run the vacuum for 3 minutes
with lid open and float cage inside tank detached. Make
sure to re-attach before next use (Figs. 3 & 4).
Fig. 3
8
Fig. 1
Fig. 2
Fig. 4
Publicité
Table des Matières
