Table des Matières
Publicité
1618748_extractor.qxp_Layout 1 7/17/19 9:30 AM Page 13
Problem solving cont.
ENGLISH
Make sure machine is turned off and electrical power cord is unplugged.
Problem
Uneven spray from jets.
Leaking or stuck
solution valve.
Pump motor not working.
Low pump pressure.
Pump pressure varies.
SERVICE INFORMATION
If your Sanitaire product
should require service
You will find the nearest Sanitaire Authorized
Service Center in your area online at
sanitairecommercial.com under service locator
or contact Sanitaire Customer Service.
If you need information about repairs or
replacement parts, or if you have questions
about your warranty, contact Sanitaire
Customer Service.
Cause
1) Clogged strainer in solution tank.
2) Clogged jets.
1) Foreign material in valve.
2) Loose brass hex nut.
3) Worn valve or seals.
1) Loose wiring.
2) Defective pump pressure switch.
3) Motor burned out.
1) Clogged strained in solution tank.
2) Punctured pump diaphram.
3) Defective rectifier or motor.
1) Defective pump.
Website:
www.sanitairecommercial.com
Call:
Sanitaire Customer Service
1-800-800-8975
Monday – Friday
9 a.m. – 8:30 p.m. EST
Solution
1) Remove debris.
2) Remove and clean.
1) Clean and replace.
2) Reseal hex and plug.
3) Replace worn parts.
1) Tighten wiring.
2) Replace switch.
3) Replace.
1) Clean and replace.
2) Replace.
3) Replace.
1) Replace pressure control switch.
www.sanitairecommercial.com 13
Publicité
Table des Matières
