Silverline 546534 Mode D'emploi page 14

GB
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• The cutting head can be lowered and secured by the Cutting Head Latching Pin (28) to make the
saw a smaller, more secure size for storage
• Ensure all bevel and mitre locks are in place before storing
• Store this tool carefully if a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer functional
and are not viable for repair .
• Do not dispose of power tools, or other waste electronic equipment (WEEE), with
household waste
• Contact your local waste disposal authority for information on the correct way to dispose
of power tools
Troubleshooting
Problem
No operation
Cutting performance poor
Power tool vibrating excessively
in use
Mitre or bevel angle difficult
to adjust
14
Possible cause
Plug fuse
Worn brushes
Power tool fault
Teeth worn or damaged
Incorrect saw blade type
Incorrect saw blade specification
Incorrectly fitted saw blade
Sawblade distorted, bent or damaged
Saw blade incorrectly mounted
Power tool fault
Build-up of saw dust
Solution
Replace fuse
Replace brushes (pair) with new, or have brushes replaced by an authorised
Silverline service centre
Contact an authorised Silverline service centre
Replace saw Blade (36)
Replace saw blade with correct type for material being sawed
Ensure saw blade meets the required blade specification for this mitre saw
Remove saw blade and refit exactly as per the instructions in this manual
Replace saw blade immediately
Re-fit saw blade exactly as per the instructions in this manual
Contact an authorised Silverline service centre
Vacuum up sawdust