Laserworld Ecoline EL-400RGB Mode D'emploi page 8

Manual: Ecoline Series EL- 400RGB
Your device runs in auto mode:
5.
Your device runs in music mode:
6.
Control the music-sensitivity by the trim pot at the front side of the device. The LED is
flashing when the device is triggered.
Your device runs in DMX mode if '10' is switched off:
7.
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a
number. To define a number use the preceding number and multiply it by 2:
Switch 1 2
Number 1 2
The laser uses 13 DMX channels, so make sure that the next device uses an address that
doesn't overlap with this range.
Channel
1 (Play mode)
2 (Patterns)
page 8 / 30
3 4 5
4 8 16
Value
0 - 51
52 - 103
104 - 155
156 - 207
208 - 255
0 - 79
80 - 94
95 - 255
6 7 8
32 64 128
Function
Laser off
Sound mode
Automatic mode
Automatic graphics mode
Manual
Static patterns
Animation
Dynamic patterns
9 10
256 Mode Switch