Product Description; Designated Use; Technical Data - Abicor Binzel ABITIG WH Mode D'emploi

2 Product Description

2 Product Description

2.1 Designated Use

2.2 Use contrary to the designated use

2.3 Technical Data

Ambient temperature for welding
Transport and storage
Relative humidity
Temperature
Tab. 2
Application process
Type of use
Type of voltage
DC polarity of the electrodes
Max. arc ignition and stabilization voltage 12 kv
Voltage rating
Control device rating
Protection type of the machine-side
connections
Shielding gas
Electrode
General torch data (EN 60 974-7)
Tab. 3
EN - 4
TIG welding torches must be used for safe welding of low- and high-alloy
materials. They are designed for robot and automatic use. Designated use also
includes the observance of the prescribed operating, maintenance and
servicing instructions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorised conversions or power increase
modifications are not allowed.
- 10 °C to + 40 °C
- 25 °C to + 55°C
up to 90 % at 20 °C
automatic
DC or AC
Usually negative
141 V peak value
1 A AC / 250 V AC
IP2X (EN 60 529)
as per DIN EN 439
Industry standard tungsten electrodes suitable for
TIG use, preferably low-radiation
®
ABITIG WH