Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel ABITIG WH Mode D'emploi

®
ABITIG WH
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
EU Declaration of Conformity
Tab. 1

1.2 Responsibilities of the user

TIG welding torches are used in industry and in the trade for inert gas welding
using tungsten electrodes and inert gases. This range can be used in all
welding positions. TIG welding torches are available in liquid-cooled models.
The liquid-cooled model requires a coolant recirculator. These operating
instructions only describe TIG welding torch ABITIG
torches may only be operated using original ABICOR BINZEL spare parts.
according to EC Low Voltage Directive 06/95/EC, Annex III.
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Authorised person: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of their design and construction, the TIG
welding torches described in these operating instructions comply with the basic
safety and health requirements of the EC directive. Any modification of the TIG
welding torches not agreed with us will void this declaration.
ABITIG
EC Low Voltage Directive 06/95/EC, Annex III
DIN EN 60 974 Part 7
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the TIG welding torches in connection
with welding units complies with the EC EMC Directive (04/108/EC) and that
the protection is correctly installed.
®
WH 220W/400W
1 Identification
®
WH. TIG welding
EN - 3