User Info; Display - Herth+Buss CrankPrint 95972081 Notice D'emploi

Operating Instruction
4. Use the Up and Down buttons to set the
hour. Press the OK button to skip forward
and set the minutes.
5. Use the Up and Down buttons to set the
minutes. Press the OK button to confirm
the setting.
NOTE
During the setting procedure, the
Up and Down buttons and the OK
button must be held down for at
least 1 second so that the system
accepts the values.
The Back button is inactive while
settings are being performed. It is
mandatory to finish the date and
time settings completely. If it is not
necessary to change the system
time, press the OK button 5 times
in succession to end the setting
and quit.

3.2.11 User info

OPTIONS
11 SET USER INFO
This option is used to input/set the workshop
information such as the address, website,
telephone number, etc. Up to 8 lines can be
input with max. 21 characters per line.
33
Press the Menu button for 5 seconds to ini-
tialise the input field and start the input. Use
the Up and Down buttons to select the de-
sired numbers, letters and characters. Press
the OK button to confirm the selection and to
select the next character. Select the charac-
8
ter " " once you have completed the entry
in one line to switch to the next input line.
Press the OK button several times once you
have finished inputting all of the details and
wish to save the changes.
HERTH+BUSS FAHRZEUGTEILE
GMBH & CO.KG
HEUSENSTAMM, GERMANY

3.2.12 Display

OPTIONS
12 DISPLAY SET
Using this option, the display of the nominal
value (selected or target starting current of
the battery) or alternatively the internal re-
sistance of the battery in the test result can
be set. Select the desired option using the
Up and Down buttons and confirm this using
the OK button.
95972081
EN