Publicité
Les langues disponibles
Les langues disponibles
Problem
4203.000.4532.1.indd 13
Cause
Solution
The overheat
When the epilator stops working and the speed
protection has been
setting indications start flashing red, the overheat
activated.
protection has been activated. Let the appliance cool
down. The lights stop flashing after 30 seconds. When
the appliance has cooled down, switch on the epilator
again. If the lights start flashing again, the epilator has
not yet cooled down sufficiently.
The overload
When the overload protection has been activated, the
protection is
speed setting indications flash red. Turn the tweezers
activated because
with your thumb until you can easily remove the
something got
item that is blocking the rotating tweezers. Then
caught between the
switch on the appliance again. Do not press the
rotating tweezers or
appliance too hard onto your skin.
because you pressed
the appliance too
hard onto your skin.
EnglisH
13
08-12-09 12:31
Publicité
