Publicité
1: SUCTION TUBE
3: AREA HAVING THE
LARGEST CIRCUMFERENCE
1: SUCTION TUBE
3: COVER
4: FRONT
1: COMPRESSOR
5: FRONT
3: BOLT (M6
25)
4:
FULLY TIGHTEN
2: LIQUID TUBE No.1
2: SUCTION HOSE
A029265
2: SUCTION HOSE
4: MARKING
A029266
3: BOLT
(M6
25)
2: SUCTION HOSE
A029123
1: CONDENSER
A029128
(n) Push the suction hose until its area having the
largest circumference goes in the suction tube.
CAUTION
1. When inserting the suction hose, make sure
that you hear a snap.
2. Check that the hose is not disconnected when
you pull it.
(o) Slide the cover.
CAUTION
After attaching the cover, check that the marking is
visible.
(p) Connect the suction hose to the compressor
using a bolt.
Tightening Torque
9.8 N•m (100 kgf•cm, 7.2 lbf•ft)
(q) Fully tighten the bolt.
Tightening Torque
5.4 N•m (55 kgf•cm, 4.0 lbf•ft)
- 91 -
00503438E
Publicité
