Publicité
3: FRONT
2: CAP (DISCARD)
4: FRONT
1: EVAPORATOR ASSEMBLY
2: PLASTIC CLAMPS [B]
1: LIQUID TUBE No.1
3: BOLT (M6
5: FRONT
4:
HAND TIGHTEN
1: LIQUID TUBE No.1
1: EVAPORATOR ASSEMBLY
A029115
2: EXPANSION VALVE
3: HEXAGON SOCKET
HEAD BOLTS
(M5
40)
A029116
3: FRONT
A029113
25)
2: CONDENSER
A029124
(c) Remove and discard the cap from the
evaporator assembly.
(d) Connect the expansion valve to the evaporator
assembly using two hexagon socket head bolts.
Tightening Torque
3.4 N•m (35 kgf•cm, 2.5 lbf•ft)
(e) Fasten the liquid tube No.1 to two plastic clamps
[B].
(f)
Loosely connect the liquid tube No.1 to the
condenser.
- 85 -
00503438E
Publicité
