Publicité
1: FACE
MODE
1: MODE DAMPER CONTROL
2: MODE DAMPER CABLE
1: ORIGINAL MODE
CONTROL BASE(DISCARD)
1: MODE CONTROL BASE
(INCLUDED IN A/C KIT)
2: VEHICLE
HARNESS
3: ORIGINAL
MODE
CONTROL BASE
A029156
4: HOOK
3: ORIGINAL
MODE
CONTROL BASE
A029292
3: HOOK
2: HEATER CONTROL PANEL
A029157
3: HOOK
2: HEATER CONTROL PANEL
A029141
(b) Set the mode control dial on the position of
"FACE" mode.
(c) Disconnect the vehicle harness from the original
mode control base.
(d) Remove the mode damper control from the
original mode control base.
CAUTION
Be careful not to bend or twist when removing the
mode damper cable.
(e) Remove and discard the original mode control
base from the heater control panel.
(f)
Assemble the mode control base (included in
A/C kit) to the heater control panel.
- 51 -
00503438E
Publicité
