Checchi & Magli PLASTIC - STOP Manuel D'utilisation Et D'entretien page 71

9
10
6
7
8
11
8
7 6
UN41-0268AI
5) Insert the pins (6).
6) Insert the washers (7).
7) Tighten the nuts (8).
8) Insert the screws (9) and the washers (10).
9) Tighten the nuts (11).
10) Place the tie rod (12) as shown in the figure.
11) Place the bushings (13) and (14) in position.
12) Insert the screws (15).
13) Tighten the nuts (16).
14) Position the planting machine supports (17) on the
centre line of the machine.
15) Secure the supports with the U-bolts (18) and nuts
(19) supplied with the reinforced frame.
16) Unscrew the screws (20) and remove the plate (21)
from both supports.
17) Lift the planting machine and insert the pins (22) in
the supports (17).
18) Position the plate (21) and tighten the screws (20)
on both supports.
19) Refit all the components originally mounted on the
standard frame (compacting roller, front support
wheels, mulch sheet roll brake, etc.).
20) Fit the tie rod (23) as shown in the figure.
21) Insert the pins (24) and secure them with their lock
pins (25).
22) Adjust the tie rod (23) to position the planting ma-
chine horizontal to the ground.
English language
10
11
10
9
10
ENCLOSURES
16
13
12
24
25 23
UN41 0269AI
31
A
14
16
15
17
25
24
Use and maintenance