Checchi & Magli PLASTIC - STOP Manuel D'utilisation Et D'entretien page 62

Loading the roll of mulch mulch sheet
2,5 mm
UN41 0240IH
To load the roll, proceed as outlined below.
1) Loosen the screws (A).
2) Spread out the disks (B) so that they are farther apart
than the width of the roll.
3) Lift and place the roll on the roller holder (D).
Forming a seedbed or planting bed
Seedbeds or planting beds can be formed using the raised bed former with the shaping roller.
For information on adjustment, see "Raised bed former and shaping roller" in the Attachments section.
Night-time work or poor visibility conditions
Working at night or in poor visibility conditions increases the risks arising from machine use; in these conditions,
proper lighting must be provided to ensure safe work.
Transporting the work vehicle
Danger - Warning
For work unit loading/unloading, use lifting equipment with a suitable capacity for the load to be lifted.
Use all possible caution when lifting to avoid damaging the work unit and causing injuries to persons involved
in operations.
English language
INFORMATION FOR USE
4) Position the roll in the centre of the work vehicle.
5) Move the disks (B) towards the roll, maintaining the
distance shown in the figure.
6) Tighten the screws (A).
A spare roll can be loaded on the supports (C) for
when the roll in use ends during laying.
22
6
2,5 mm
D
Use and maintenance