JUKI MO-50e Manuel D'instructions page 36

A
B
35
Maintenance
Knives
The knives are made from
special material and are very
durable.
They can be replaced if the
blades become dull or damaged.
Changing light bulb
- Switch the machine off "O" and
disconnect it from electricity
supply by removing the mains
plug.
- Loosen the bulb cover setscrew
(A) and remove the bulb cover.
- Unscrew the bulb and replace it
with a new one.
- Attach bulb cover and retighten
the setscrew.
Note:
Always use 110V/230V/240V/
15W bulbs. Bulbs are available
from your local dealer.
Cleaning and lubricating
- Disconnect machine from
electricity supply.
During sewing dust and fluff
collect in and on the machine.
This should be removed
regularly.
Your overlocker requires very
little lubrication but if used
frequently, lubricate the points
illustrated (B) with a drop of oil.