Pulsar ACCOLADE 2 LRF XP50 PRO Mode D'emploi page 7

Using Built-in Laser Rangefinder
Press the ON/OFF button (1) briefly to power the device on.
•
Press the UP button (2) briefly to start the rangefinder. The rangefinder reticle
•
will appear in the center of the display.
• Place the rangefinder reticle on the target
to measure the distance.
Briefly press the UP button (2) to measure
•
the distance.
• The distance in meters (or yards) is
displayed in the upper right corner of the
display.
• --- m appears on the display in the case of
error or failure to measure the distance.
• The rangefinder will turn off after 3-4 seconds of inactivity. The rangefinder
reticle and obtained range values in the field of view will disappear.
Scan Mode (SCAN)
Press the ON/OFF button (1) briefly to power the device on.
•
Briefly press the UP button (2) to start the rangefinder. The rangefinder
•
reticle will appear on the display.
• Place the rangefinder reticle on the measuring target.
Press and hold down the UP button (2) for 2 seconds to measure the distance
•
in scan mode. A SCAN message will appear in the upper right corner of the
display.
• The distance value will change in real time depending on the visual target
distance.
• Additional settings of the rangefinder are in the main menu item (access the
menu by holding down the MENU button (3)).
Hold down the UP button (2) for 2 seconds to deactivate the Scan Mode.
•
Stream Vision App
Download the Stream Vision app to stream the image via Wi-Fi from the display
of your Accolade LRF to a smartphone or tablet. Detailed instructions are
available on the Internet at: www.pulsar-vision.com.
125
m
SCAN
4
ENGLISH