Makita VC005GL Manuel D'instruction page 6

PARTS DESCRIPTION
Fig.1
► 1. Head unit 2. Filter cage 3. Cloth filter 4. Tank
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridges are
removed before adjusting or checking function on
the appliance.
Installing or removing battery
cartridge
CAUTION:
Always switch off the appliance
before installing or removing battery cartridges.
CAUTION:
Hold the cleaner and battery car-
tridges firmly when installing or removing battery
cartridges. Failure to do so may cause them to slip
off your hands, resulting in damage to the cleaner and
battery cartridges or personal injury.
CAUTION:
Be careful not to pinch your fin-
gers when opening or closing the battery cover.
Failure to do so may cause personal injury.
The cleaner has double battery slots. With two identical
batteries in parallel, you can extend your running time
in one or more uses without having to stop to recharge
batteries. The cleaner also works with a single battery,
1
so you can choose with either double batteries or single
battery according to your needs.
2
3
4 Fig.2
► 1. Left battery slot 2. Right battery slot
With double batteries
Continuous drive with two batteries allows longer runtime
and more efficient cleaning. When the first battery is becom-
ing empty, the cleaner automatically switches a power
source, so it continues working with the second battery.
NOTE: The left battery slot (when facing the front of
the cleaner) has priority over the right battery slot.
The right battery slot will only be identified as a power
source, either when no battery is installed in the
left battery slot or the battery in the left battery slot
becomes empty.
NOTE: You can remove the battery from the left
battery slot and recharge it after the cleaner has
switched its power source from the left battery slot to
the right without ceasing operation. To give priority
back to the left battery slot after installing a recharged
battery, restart the cleaner.
With a single battery
Only one battery is required as a power source in either
the left or right battery slot. The cleaner automatically
determines which battery slot is available according to
operating conditions.
Installation and uninstallation
To install battery cartridges, release the lock first,
and open the battery cover. Then insert the battery
cartridges.
Fig.3
► 1. Lock 2. Battery cover
6 ENGLISH
1
2
1
2