Makita VC005GL Manuel D'instruction page 14

Storage of accessories
Accessories and attachments not in use, such as noz-
zles and brushes, can be hooked and stored in the multi
hook at the rear of the cleaner.
2
Fig.27
► 1. Multi hook 2. Accessories and attachments not
in use
Pipes (with an optional stopper installed) can be placed into
the pipe holder when not using the cleaner for a short time.
2
Fig.28
► 1. Stopper (optional accessory) 2. Pipe holder
A hose can be wrapped and stored around the housing
of the cleaner in large loops. Keep its root end installed
in the hose inlet and hang the loops on the multi hook
with the loose end tied up.
Fig.29
2
1
1
14 ENGLISH
Cleaning of cloth filter
Clean out the cloth filter at regular intervals since
clogged cloth filter may result in poor suction
performance.
Wipe and shake dust off the cloth filter by hand on
occasions.
Fig.30
► 1. Cloth filter
Cleaning of powder filter (HEPA) and
prefilter
Optional accessory
Clean out the powder filter, prefilter and damper at
regular intervals since clogged filters and damper may
result in poor suction performance.
Routinely wipe and shake dust off filters and damper
by hand.
Occasionally wash the powder filter in water, rinse and
dry thoroughly in the shade before use. Never wash
filters in a washing machine.
Fig.31
NOTE: Do not rub or scratch the powder filter, the
prefilter and the damper with hard objects such as a
brush and a paddle.
NOTE: The filters wear out in course of time. It is
recommended to have some spares for them.
1