Publicité
TO DISASSEMBLE VALVE:
CAUTION: SHUT OFF HOT AND COLD WATER SUPPLIES AND OPEN FAUCET HANDLES TO ALLEVIATE WATER PRESSURE AND INSURE THAT
COMPLETE WATER SHUT-OFF HAS BEEN ACCOMPLISHED.
1. Remove stem extension, screw, and stem extension.
2. Remove escutcheon adjuster.
3. Using cartridge removal tool (not supplied), unscrew and remove cartridge retainer.
4. Replace stem extension and screw. Grasp stem extension, being careful not to damage threads, pull straight upward removing cartridge.
SCREW
STEM
EXTENSION
CARTRIDGE
REMOVAL
TOOL
ESCUTCHEON
ADJUSTER
CARTRIDGE
RETAINER NUT
1248
CARTRIDGE
TOP
LOCKNUT
MT335F JAN '92
TO ASSEMBLE VALVE:
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN
CAUSE A FAULTY INSTALLATION OR DAMAGE THE NEW CARTRIDGE.
1. Drop stem extension with cartridge attached into valve body, press down until it bot-
toms.
2. Slowly rotate stem extension clockwise while still pressing down. This will align the
"KEY" on the cartridge with the "NOTCH" in the valve body. When the key enters the
notch you will feel it drop in, then the cartridge will be in place. To be certain, rotate
the stem extension clockwise and then counterclockwise. You should feel the car-
tridge stop in both directions. If so, the cartridge is in place. Do not turn on water yet.
3. Using a cartridge removal tool (not supplied), reinstall cartridge retainer nut until it bot-
toms (DO NOT CROSS THREAD).
4. Reinstall escutcheon adjuster.
You are now ready to turn on the water. Check complete system for leaks.
HELPLINE: Call our toll free Helpline number:
(800) 321-6636
for answers to any product, installation, replacement
parts, or warranty questions.
MOEN INCORPORATED, 377 WOODLAND AVE., ELYRIA, OH. 44035, U.S.A.
STEM
KEY
NOTCH IN
BODY
®
© Copyright, 1992
Moen Incorporated
Printed in U.S.A.
Publicité
