Safety Notes; Functional Description; Intended Use; Product Features - Bosch PCL 10 Notice Originale

OBJ_BUCH-693-002.book Page 10 Friday, June 13, 2008 2:17 PM
10 | English

Safety Notes

en
Working safely with the measuring
tool is possible only when the oper-
ating and safety information are read
completely and the instructions con-
tained therein are strictly followed.
Never make warning labels on the
measuring tool unrecognisable.
SAVE THESE INSTRUCTIONS.
Caution – The use of other operating or ad-
justing equipment or the application of other
processing methods than those mentioned
here, can lead to dangerous radiation expo-
sure.
The measuring tool is delivered with a warn-
ing label in German language (marked with
the number 7 in the representation of the
measuring tool on the graphic page).
IEC 60825-1: 2007-03, < 1 mW, 635 nm
Laser Radiation
Do not stare into beam
Class 2 laser product
Before putting into operation for the first
time, attach the supplied sticker in your na-
tional language over the German text on the
warning label.
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam yourself.
This measuring tool produces laser
class 2 laser radiation according to
IEC 60825-1. This can lead to per-
sons being blinded.
Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualisation of the laser beam, but
they do not protect against laser radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and re-
duce colour perception.
1 609 929 R04 | (13.6.08)
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.

Functional Description

Intended Use

The measuring tool is intended for determining
and checking horiontal and vertical lines.
The measuring tool is suitable exclusively for
operation in enclosed working sites.

Product Features

The numbering of the product features shown re-
fers to the illustration of the measuring tool on
the graphic page.
1 Exit opening for laser beam
2 Automatic levelling indicator
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Contact surface
7 Laser warning label
8 Tripod mount 1/4"
9 Protective case
10 Laser viewing glasses*
11 Tripod*
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools