Publicité
Les langues disponibles
Les langues disponibles
GESF 260
Technical Data
Electric snow blower
Art. No-Nr. ........................................................................94567
Service connection .................................230V~50Hz
Motor output P1 .............................................. 1300 W
Idle speed ....................................................4000 min
Cylinder Ø..............................................................ca. 120 mm
Max. snow height ...........................................120 mm
Read and understand the
operating instructions before
using the appliance. Abide by all
the safety measures stated in the service manual. Act
responsibly toward third parties.
In case of any doubts about connection and
operation refer please to our customer center
Specified Conditions Of Use
This appliance has exclusively been designed to be
used as a snow blower for removing snow from paved
roads and surfaces around house and in the garden.
Respecting technical data and safety precautions.
Use the appliance only for removing light and
loose snow (fresh snow) up to the maximum snow
height of app. 10 cm.
Icy snow and ice must not be removed by the
snow blower.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Please be sure to know that our appliances have not
been designed for industrial use.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
GESF 260
Max. snow removal width ...........................260 mm
Max. throw-away distance ........................................2 - 9 m
Degree of protection....................................................... IPX4
-1
Protection class .............................................................II
Weight .................................................................... 6,3 kg
Sound power level L
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
Observe to keep out of dangerous zone
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Caution!
Read the Operating Instructions!
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Wear eye protective goggles !
Wear ear protectors!
Warning against thrown-off items
ENGLISH
............................................ 99 db(A)
WA
11
Publicité
