GRAUPNER HYDROPLANE 3D Instructions De Montage page 22

•
Glue the two upper sponsons (right and left - parts
12 + 13) to the hull wing using UHU por.
•
The tailplane reinforcement (part 15) can now be glued to the tailplane (part 14) using UHU por. Sand the
two upper elevons (part 16) to a 45° chamfer and attach them to the tailplane using full-length strips of
adhesive tape. Note that the chamfer must be on the underside in this case. Here again, the elevons must
be free to move to both sides of neutral.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce modifications. Sous réserve de modifications! Nous ne sommes pas responsables
d'éventuelles erreurs d'impression! #56543
22
08/2005