GEZE Slimdrive SD Notice De Montage page 14

Integrierte Schließfolgeregelung Slimdrive SD Türblattmontage Bandseite , Datei 88340 SD_IS-T-BS_180400.p65
Mounting of Bowden cable
If required, replace existing cable by cable with spherical head that comes
with the system.
Insert cable at the valve lever of Slimdrive SD-IS first, then pass it through the
stop face and the hole in the front.
Valve lever
Stop face
Hole in the front
View left/right correspondingly
Slip on casing of Bowden cable beginning at the end of the cable and push through the hole in
the front up to the stop face in Slimdrive SD-IS .
Casing of
Bowden
cable
View left/right correspondingly
14