GEZE Slimdrive SD Notice De Montage page 12

Integrierte Schließfolgeregelung Slimdrive SD Türblattmontage Bandseite , Datei 88340 SD_IS-T-BS_180400.p65
Mounting of guide rails
Mount short rail on active leaf side (either left or rights side as required) using fitting template or
drawing.
Position: Adjusting device of Bowden cable on top, the pick-up for the cable faces the hinge
side (right or left).
Adjusting device
of Bowden cable
Direction of Bowden cable when
Direction of Bowden cable when
mounted on active leaf left
mounted on active leaf right
Push end cap with lead-through for Bowden cable into the guide rail towards the hinge side,
screw down acc. to template/drawing.
End cap with
lead-through for
Bowden cable
when mounted when mounted
on active leaf left on active leaf right
Push sliding pad with lever towards drive
Sliding pad
with lever
Illustration: view from below
Drive on left side
Drive on right side
Push transition piece into guide rail towards door centre , screw down
Transition piece
(in bottom chamber)
when mounted on when mounted on
active leaf left active leaf right
12