Safety Instructions - ZANKER KOU20712XB Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General Safety
Only a qualified person must install this appliance and replace the cable.
Do not use the appliance before installing it in the built-in structure.
Disconnect the appliance from the power supply before carrying out any
maintenance.
If the mains power supply cable is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified persons
to avoid an electrical hazard.
The control panel must be connected to specified heating unit with
matching colours of connectors, to avoid possible hazard.
The means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
WARNING: The appliance and its accessible parts become hot during
use. Care should be taken to avoid touching heating elements.
Always use oven gloves to remove or put in accessories or ovenware.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
glass door since they can scratch the surface, which may result in
shattering of the glass.

Safety instructions

Installation
Warning! Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with the
appliance.
Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
Do not pull the appliance by the handle.
Install the appliance in a safe and suitable place that
meets installation requirements.
The kitchen cabinet and the recess must have
suitable dimensions.
Keep the minimum distance from other appliances
and units.
Before mounting the appliance, check if the oven
door opens without restraint.
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
The appliance is equipped with an electric cooling
system. It must be operated with the electric power
supply.
Cabinet minimum height
(Cabinet under the work-
top minimum height)
Cabinet width
Cabinet depth
Height of the front of the
appliance
Height of the back of the
appliance
590 (600) mm
560 mm
550 (550) mm
598 mm
579 mm
3

Publicité

Table des Matières
loading

Table des Matières