ZANKER KOU20712XB Notice D'utilisation page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Everyday Use
Accessories
How to use: Aqua Clean
This cleaning procedure uses humidity to remove
remaining fat and food particles from the oven.
Step 1
Pour water into the cavity embossment:
150 ml.
Step 2
Set the function:
How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal glass panel to clean it. Read the
whole "Removing and installing door" instruction before you remove the glass panels.
Caution! Do not use the oven without the glass panels.
Step 1
Open the door fully and hold both
hinges.
Step 3
Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door from
its seat.
Clean the cavity after each use. Fat accumulation or other residue may cause fire.
Moisture can condense in the oven or on the door glass panels. To decrease the condensation,
let the oven work for 10 minutes before cooking. Do not store the food in the oven for longer than
20 minutes. Dry the cavity with a soft cloth after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a
mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
.
Step 3
Set the temperature to 90 °C.
Step 4
Let the oven work for 30 min.
Step 5
Turn off the oven.
Step 6
Wait until the oven is cold. Dry the cavi-
ty with a soft cloth.
Step 2
Lift and turn the levers fully on both
hinges.
Step 4
Put the door on a soft cloth on a stable
surface and release the locking system
to remove the internal glass panel.
13

Publicité

Table des Matières
loading

Table des Matières