Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
In any cases not included in this table please contact
with an Authorised Service Centre.
Problem
The oven does not heat
up.
Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven
cavity. Do not remove the rating plate from the oven cavity.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Energy efficiency
Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Check if...
The fuse is blown.
We recommend that you write the data here:
Problem
The door gasket is dam-
aged.
The lamp does not work.
.........................................
.........................................
.........................................
Zanker
KOU20712XB 944068060
94.9
A
0.89 kWh/cycle
0.75 kWh/cycle
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
The lamp is burnt out.
15