Tips And Safety Precautions - Sharp LL-T1820-H Mode D'emploi

Tips and safety precautions

- Under certain display conditions, minute specks
or spots may be noticeable. This is common for
liquid crystal monitors and is not a malfunction.
- The LCD panel has been manufactured using
highly elaborate technology. Properly working
pixels comprise 99.99% of total pixels. However,
please understand that 0.01% or less of pixels
may be missing or be brighter than usual.
- Do not leave the screen displaying idly for long
periods of time, as this could cause afterimage to
remain.
- If the brightness is adjusted to the minimum
setting it may be difficult to see the screen.
- The quality of the computer signal may influence
the quality of the display. We recommend using a
computer able to emit high quality video signals.
- Never rub or tap the monitor with hard objects.
- Please understand that Sharp Corporation bears
no responsibility for errors made during use by
the customer or a third party, nor for any other
malfunctions or damage to this product arising
during use, except where indemnity liability is
recognized under law.
- This monitor and its accessories may be
upgraded without advance notice.
Location
- Do not use the monitor where ventilation is poor,
where there is a lot of dust, where humidity is
high, or where the monitor may come into contact
with oil or steam, as this could lead to fire.
- Ensure that the monitor does not come into
contact with water or other fluids. Ensure that no
objects such as paper clips or pins enter the
monitor as this could lead to fire or electric
shock.
- Do not place the monitor on top of unstable
objects or in unsafe places. Do not allow the
monitor to come into contact with strong shocks
or vibrations. Causing the monitor to fall or topple
over may damage it.
- Do not use in places where the monitor will be
subject to direct sunlight, near heating equipment
or anywhere else where there is likelihood of high
temperature, as this may lead to generation of
excessive heat and outbreak of fire.
- When carrying the monitor, firmly grasp both the
display and stand section.If the monitor is lifted
by the display only, the stand may abruptly pop
out or move, and this could lead to injury. If the
monitor is inclined, the stand may move and
cause injury.
- Be careful not to allow your fingers to be pinched
between the display and stand. (Especially in the
area of attachment.)
All manuals and user guides at all-guides.com
The Power Cord
- Do not damage the power cord nor place heavy
- Insert the power plug directly into the AC outlet.
Monitor and accessory checklist
- Please check that the following items are
Notes:
- You are advised to retain the carton in case the
- Sharp Corporation holds authorship rights to the
Manual Scope
- In this booklet, Microsoft Windows XP will be
- Microsoft and Windows are registered
- Macintosh is a registered trademark of Apple
9
objects on it, stretch it or overly bend it. Also, do
not add extension cords. Damage to the cord may
result in fire or electric shock.
Adding an extension cord may lead to fire as a
result of overheating.
included in the package.
- LCD monitor (1)
- Analog signal cable (1)
(model name: QCNW-1051MPZZ)
- Digital signal cable (1)
(model name: QCNW-1044MPZZ)
- USB cable (1)
(model name: QCNW-1042MPZZ)
- CD-ROM (1)
- Operation manual (1)
monitor needs to be transported.
Utility Disk program. Do not reproduce it without
permission.
referred to as [WindowsXP], Microsoft Windows
Millenium as [WindowsMe], Microsoft Windows
2000 as [Windows2000], Microsoft Windows 98
as [Windows98], Microsoft Windows 95 as
[Windows95], and Microsoft Windows Version 3.1
as [Windows3.1]. When there is no need to
distinguish between programs, the term
[Windows] will be used.
trademarks of Microsoft Corporation.
Computer, Inc.