Sharp LL-T1820-H Mode D'emploi page 29

Installing set-up information and the ICC profile (For Windows)
For Windows2000
Installing monitor set-up information into Win-
dows2000, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the CD-ROM drive is
"D drive".
1. Load the accessory CD-ROM into the CD-ROM
drive of the computer.
2. Click on the [Start] button. From [Settings],
choose [Control Panel].
3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. Click on [Properties], [Driver] and [Update Driver].
6. When [Upgrade Device Driver Wizard] appears,
click [Next].
7. Check [Display a list of the known drivers for this
device so that I can choose a specific driver] and
click [Next].
8. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is
[D:], and click [OK].
9. Select the monitor from the list displayed and
click [Next].
10. Click [Next], confirm that the monitor's name
appears on the screen, and click [Finish]. If [The
Digital Signature Not Found] appears, click [Yes].
11. Click on [Close].
12. Click [OK], and close the window.
All manuals and user guides at all-guides.com
Installing monitor set-up information into
WindowsMe, and setting the monitor's ICC profile as
a predetermined value.
This explanation assumes that the CD-ROM drive is
"D drive".
If the "Add new Hardware Wizard" has appeared:
1. Load the accessory CD-ROM into the CD-ROM
2. Check [Specify the location of the driver
3. Check [Display a list of all the drivers in a
4. When [Models] is displayed, click on [Have disk],
5. Select the monitor details from the list, then click
If the "Add New Hardware Wizard" has not appeared:
1. Load the accessory CD-ROM into the CD-ROM
2. Click on the [Start] button. From [Settings],
3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug &
6. Check [Specify the location of the driver
7. Check [Display a list of all the drivers in a
8. When [Models] is displayed, click on [Have disk],
9. Select the monitor details, then click [Next],
10. Check that the monitor details are displayed, then
11. Click [OK], and close the window.
29
For WindowsMe
drive of the computer.
[Advanced]] and click [Next].
specific location, so you can select the driver you
want.], then click [Next].
confirm that [Copy manufacturer's files from:] is
[D:], and click [OK].
[Next], [Next], and [Finish]. If the "Add new
Hardware Wizard" appears, repeat the installation
commands beginning from 2 above.
drive of the computer.
choose [Control Panel].
Play monitors] and click on [Change].
[Advanced]] and click [Next].
specific location, so you can select the driver you
want.] and click [Next].
confirm that [Copy manufacturer's files from:] is
[D:], and click [OK].
[Next], and [Finish].
click [Apply].