Description; Purpose; Overview; Important Safety Instructions - GreenWorks BLM303 Manuel D'opérateur

EN
1

DESCRIPTION

1.1

PURPOSE

The machine is used to propel air out of a tube to move
unwanted materials such as leaves in the yard. Some
machines also suck in leaves and small twigs through a
vacuum, and shred them into a bag.
1.2

OVERVIEW

Figure 1 - 4.
1 Trigger
2 Turbo button
3 Cruise control lever
4 Tube release button
5 Tube
2 IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING (THIS
POWER TOOL)
Read and understand all instructions before using this
product. Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious
personal injury. When using an electrical appliance,
basic precautions should always be followed, including
the following:
• Do not use on wet surfaces.
• Do not charge the unit outdoors.
• For household use.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer's recommended attachments.
• If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to a service center.
• Do not handle appliance with wet hands.
• Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair,
and anything that may reduce air flow.
• Keep hair, loose clothing, fingers and all body parts
away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not operate power tools in an explosive
atmosphere, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
that may ignite the dust or fumes.
• Store indoors. Do not expose to rain or water. Avoid
direct sunshine.
6 Lock button
7 Slot
8 Battery release
button
WARNING
English
• Never allow children to operate the equipment.
Never allow adults to operate the equipment without
proper instruction.
• Wear heavy long pants, boots, and gloves. Avoid
loose garments or jewellery that could get caught in
moving parts of the machine or its motor.
• Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
• Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
• Do not use the tool if the switch does not turn it on
or off. Any tool that cannot be controlled with the
switch is dangerous, and must be repaired.
• Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
• Do not operate in poor lighting.
• Do not use to pick up flammable or combustible
liquids, such as gasoline, or use in areas where they
may be present
• Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or filters in place (if
applicable).
• Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the machine.
• Use only identical manufacturer's replacement parts
and accessories. Use of any other parts may create
a hazard or cause product damage.
3 BATTERY-OPERATED POWER
TOOLS
• Do not use battery-operated appliance in rain.
• Turn off all controls before removing the battery.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use only the charger supplied by the manufacturer
to recharge.
• Use appliances only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to battery pack,
picking up or carrying the appliance. Carry the
power tool with your finger on the switch or energize
power tool that have the switch on invites accidents.
• Disconnect the battery pack from the power tool
before making any adjustments, changing
accessories, or storing the power tool. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
4