Dentsply Maillefer X-SMART DUAL Mode D'emploi page 10

3. Insert the file into the contra angle:

Insert the file into the chuck until it stops

Lightly turn the file until it engages with the latch mechanism. Push inward to
click
CAUTION: During operation, make sure there is always contact between the file
NOTICE:
4. Insert the lip clip in the lip clip connector. Attach the lip clip to the patient for apex
locator function or dual mode.
 The device is now operational.
NOTICE:
NVG / F190294X / 06 / 2007 –updated 08/2009
and the fork. Otherwise the apex position cannot be determined
(Apex locator or dual modes).
To remove the file, press on the push button.
The unit can also be used as an apex locator only. In this case, the
working length determination can be achieved using the regular
handpiece or connecting the measuring cable on the front of the unit.
- 10 / 148 -