GRAUPNER EXTRA 300 SHP Instructions De Montage page 28

surfaces work smoothly and immediately at an appropriate distance, and deflect in
the correct "sense" (direction) relative to the stick movements.
Repeat the check with the engine running while a friend holds the model securely for
you.
If you are a relative beginner to model flying, we recommend that you enlist the aid of
an experienced model pilot to help you check and test-fly the model.
Care and maintenance
• Clean the model carefully after every flight, and remove any dirt from the
propeller. Clean the aeroplane and the RC components using suitable cleaning
agents only. Ask your model shop for information if you are not sure.
• If the model is not to be operated for a considerable time it is important to clean
and re-lubricate all the moving parts.
Notes on completing the model
• Before building the model it is important that you study the plan and read the
instructions right through to the end. Tools can be dangerous; please be aware of
the hazards involved in using them.
• Use cable of adequate cross-section, capable of carrying the currents which will
flow when the model is flying.
• Before making any glued joints, be sure to clean the surfaces and remove all
traces of grease. We recommend sanding lightly, or wiping with a non-greasy
cleaning agent. The same applies to surfaces to be painted, otherwise the paint is
unlikely to adhere well. Before gluing parts to the fuselage it is essential to
roughen the surfaces with fine abrasive paper and de-grease them with acetone
or similar solvent, otherwise you will not obtain strong, durable joints. This applies
in particular to moulded GRP fuselages.
Additional items required
Motor and accessories
Motor
Order No.
OS MAX 120 AX
2703
OS MAX 160 FX
1923
OS MAX FT 160
1412
G 26 petrol engine
1903
Radio control system
For this model you require at least a four-channel RC system with six servos.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
Capacity Silencer
cc Order No.
20.0 2703.33
1839.33
26.23
2 x 13.26 1821.33
or
1894.33
26 1903.33
Spacer
Order No.
2703.36A
28
Propeller
Order No.
38 x 25 cm
1318.38.25
40 x 20 cm
1318.40.20
38 x 20 cm
1318.38.20
45 x 20 cm
1318.45.20
02/2007