Conrad PROFIPOWER Mode D'emploi page 9

Old equipment
If one day the device should be taken out of operation, leave it according to
the valid laws and regulations at one of the appropriate collecting points. In
case of doubt please turn to the refuse responsible or ask for it at the appro-
priate local agency. Do NOT add to your domestic refuse!
In no case put the device to your regular domestic refuse!
The 3 V button cell (in the battery compartment at the rear side of
the device) needs to be removed separately on a battery collecting
point.
Therefore, remove the button cell before you hand over the device
for removal!
The waste disposal fees for device and battery removal, as valid in Germany,
are already paid in advance by the manufacturer.
WEEE Reg.Nr. DE 36207475
Protect our environment by acting in a responsible way!
11 Overview technical data
Brand
Article 12 V Time switch with LCD read-out
Article number 2.440.007
Type of product Instrument for monitoring and control, pro-
grammable
Data screen LCD display with background illumination
Connection 12 V car socket
Input voltage 12 V DC direct current (DC) 12 V (Volt)
Output voltage 12 V DC
8 A DC, max. 12 V/96 W
Output power max.
Fuse 12 A fuse built in
Length connecting cable ca. 40 cm
Battery protector function To avoid discharging the battery, the timer
unit will cut off the power automatically when
the voltage of battery is lower than 8.0 V.
Type connecting plug 12 V socket for connecting 12 V devices up to
8 A/96 W max. power consumption.
Data back up For temporary data back up, built in button
battery 3 V 30 mA.
Dimensions article 97 x 54 x 32 mm (L x W x H)
Dimensions packed article 226 x 130 x 38 mm (L x W x H)
Weight unpacked article 0,118 kg (without 3 V battery, incl. connecting
cable)
Weight 3 V battery 0,003 kg (version CR 2032 lithium cell)
Weight packed article 0,266 kg (incl. manual) 0,221 kg (excl. manual)
Packaging 0,060 kg carton, 0,040 kg synthetic material
(PET)
082009 technical changes are, without pre-warning device, reserved at all times.
18
profipower_2440007_Timer2_Manual_1292_ok_k1.indd 18-19
Explanation of the symbols applied to the product, the packaging
or the manual:
Read the manual before using the device and preserve it
conscientious.
Keep far from children. No toys!
Do absolutely not leave the product at your domestic refuse.
Leave at appropriate collection point.
Do not use the product in the open air.
Protect product against moist and wet influences.
Product works on direct current.
12 clarification of conformity
We, the company axhess GmbH & Co. KG, Bergstraße 18, D 53457 Hausen,
clarify the considered product ProfiPower 12 V Time switch with digital display,
(art. no. 2.440.007) to which this clarification agrees, in the concept and
construction of our version, to all safety and health regulations determined by
the EG.
Applied EG regulation(s)
Hausen, July 10th 2009
Axel Hess,
Director
axhess GmbH & Co. KG
2004/104/EC; 2006/28/EC 11
19
25.08.2009 11:25:56