Conrad PROFIPOWER Mode D'emploi page 8

Activating the time switch, switching on
1. Press the »MODE/START« key, the »TIMER« indicator lights up. The indi-
cators »ON« and »OFF« are not active. This confirms you the time switch
is activated.
2. As long as the time switch is switched »ON«, the indicator »TIMER« is
visible and the »ON« indicator is shown. Therefore, the indicator »OFF« is
not shown.
3: Wenn all indicators on the display are shown the time switch is, in accor-
dance with the preset time, switched off.
Hour :

still

flash
away
Hour :

still

flash
away
Hour :

still

flash
away
Hour :

still

flash
away
1. Hold both keys 5 seconds for resetting all clock setting, the LCD will
display all zero.
2. Hold the »MODE/START« key 5 seconds for resuming the timer again by
running the old timer setting.
3. Hold the »SET/TIMER« key 5 seconds for cancelling all timer setting, it is
preparing for new Timer mode setting.
16
profipower_2440007_Timer2_Manual_1292_ok_k1.indd 16-17
Minute Timer ON OFF

  
Minute Timer ON OFF


 
Minute Timer ON OFF
 


Minute Timer ON OFF
   
7 Maintenance and cleansing of the device
Only use a dry cloth to clean the device. Do not use any liquids or chemical
cleaning agents. Never immerse the device in liquid. Never allow fluids to spill
onto the device.
8 Error discarding
Time switch does not reproduce any functions
Possible cause:
- The supporting battery is not active, placed incorrectly or empty.
Possible solution:
- Activate supporting battery, place battery in correct position or change
battery.
The display seems to be ok, nevertheless there is no current supply to the
connected device
Possible cause:
- The 12 V socket does not receive any electric current. Time switch does not
make contact.
Possible solution:
- Start the vehicle.
- Plug the time switch correctly in the 12 V socket.
- Check connection with the connected device and possibly install again.
- Connecting device or connecting cable is defective, check and if necessary
have it repaired. Do not use time switch any longer.
9 Warranty
In general the axhess GmbH & Co. KG warranty conditions are valid. These
refer exclusively to manufacturing and material defects. Warranty applies
from the date of purchase and expires 24 months after this date. If the time
switch or the connecting cable should be defective, return it to your dealer or
send it to us. To claim your warranty you definitely need to add the following
appendixes:
- copy of the buying voucher (receipt/invoice) with purchase date
- indication of the reason of complaint, error description
10 Removal
The packaging is recyclable. Deposit the packaging at the appropirate re-
cyclable domestic refuse.
17
25.08.2009 11:25:56