Operation; Transport - Kärcher NT 14/1 Ap Adv Mode D'emploi

Operation

Fold the push handle in/out
Illustration
 Fold the push handle upward. The push
handle will lock into place.
 Press the latches on the side of the push
handle. Fold the push handle down.
Turning on the Appliance
 Plug in the mains plug.
 Switch on the appliance at the main
switch.
Working with electrical power tools
Only for appliances with built-in socket:
DANGER
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.
 Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Switch on the appliance at the main
switch.
Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power
tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration
 Adjust the stepped power tool adaptor
to fit the connection of the electric pow-
er tool.
Illustration
 Remove the elbow from the handle.
 Insert the connection socket on the
handle.
Illustration
 Connect the adaptor to the electric pow-
er tool.
Semi-automatic filter dedusting
Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
Illustration
 Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times. The flat
folded filter is automatically cleaned
through an air jet (pulsating sound).
Cleaning areas that are difficult to
Illustration
 Press the chassis latches and remove
the vacuum unit.
Illustration
 Clean areas that are difficult to access
or steps.
Turn off the appliance
 Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times.
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Storing the Appliance
Illustration
 Store the suction hose, the manifold
and the mains cable as shown in the il-
lustration.
 Place the appliance in a dry room and
secure it from unauthorized use.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
– 3
EN
access

Transport

13